| Description
- a graphic
program
- details the
Deck Cross Sections
- up to 5 partial sections
- 3 drawing scale options
- up to 6 different cross
slopes
- barrier and/or parapet/sidewalk
options
- up to 20 longitudinal beams
- constant or variable beam
spacing
- calculates concrete quantities
- creates the input file GDOT – Reinforcing Steel. (A program for producing reinforcing
steel quantities and schedules – under development.)
Uses one (1) of following beams:
| AASHTO
Type I Mod PSC
AASHTO
Type II PSC
AASHTO
Type III PSC
AASHTO
Type IV PSC
AASHTO
Type V PSC |
AISC
W27
AISC
W30
AISC
W33
AISC
W36
Plate
Girder |
2'-3"
(27"h x 18"w) RCDG
2'-9"
(33"h x 18"w) RCDG |
Partial sections available:
| Thru Slab |
all beams |
|
Thru Diaphragm |
AASHTO PSC, AISC or Plate Girder |
| Thru Slab At Midspan |
RCDG |
|
Thru Edge Beam |
all beams |
| Thru Endwall |
all beams |
|
Thru Slab At Intermediate Bent |
all beams |
Units
English
Units
Version 1.0 Release
Notes
Improvements:
VAX
FORTRAN code has been transferred and recompiled for the PC. A Visual Basic application has been developed
to create the input file, run the program and view the outputs.
Fixes:
This
is the initial release.
System Requirements:
| Operating
System: |
Tested
with Windows NT 4.0, Windows 2000 or Windows XP Professional |
|
Disk
Space: |
2.1MB |
| Memory: |
64MB |
|
Additional Required Software: |
MicroStation/J
with the GDOT Office of Bridge and Structural Design MicroStation
Customization |
User's Manual
User's
Manual is available in the program.
Installation Instructions:
1.
Ensure that the GDOT Office of Bridge and Structural Design MicroStation
Customization is installed. Click here
to review the MicroStation Customization installation instructions.
2.
Uninstall any old versions of GDOT – Deck Sections (Start |
Settings | Control Panel | Add/Remove Programs).
3.
Download the self-extracting .EXE file to a directory on your hard
disk by clicking here: Deck
Sections
4.
This will download files to the directory you select on your hard
drive. (e.g. C:\TEMP).
5.
Execute c:\temp\SETUP.EXE and accept the defaults.
WARNING: Do
not change the folder and file structure for Deck Sections during the
installation. If the folder and file structure is changed, Deck Sections
will not run.
Return to Top |